D: here is my Cruzbike kickstand.
I used some parts from a bottom bracket, then bolted the affair together.

BUT.
The kickstand won't prevent the bike from toppling.
The front boom pivots.
On the last pic, you can see the bolt that would need to be wider to place a guard piece on. That would prevent the front boom from pivotting.
I tried placing a second kickstand on the front affair.
The tension the forks is under prevented that.
The bike shop couldn't figure it out either.

The bolt looks pretty hard to replace with a longer one.
I figured a coupla metal plates with a hole in each end.
Place on on the bolt, on each side of the steering tube.
Hold in place with a pin.

Voila- the kickstand would work.